• +(5411) 4715 0123
  • Lamadrid 474 - Troncos del Talar - Tigre
  • laapsa@laapsa.com.ar

Fluids for metalworking

KLANCLEAN / INDUSTRIAL CLEANER

The line of cleaner agents Kläntenn® exceeds our end-users’ expectations; products are highly concentrated at a very accessible cost. Designed under state-of-the-art technology, our detergents are cutting edge products in industrial processes.

KLANCUT / CUTTING OIL

Cutting oils of Kläntenn® family are clear fluids with different additive configuration, depending on the required use. In general, they have a set of extreme pressure additives, also a wide range of chlorine-free or super additive products for extremely demanding operations, such as the vertical broaching or the formation of threads or gear. All products have anti-fogging additives; therefore, they are not so harmful to the environment.

KLANRUST

They are chemical agents that react with the metal surface or the environment by disrupting the oxidation mechanism or the reaction caused by corrosion. Corrosion inhibitors are absorbed on the metal surface and form a protective layer between the metal and the surrounding environment, preventing oxygen, metal and moisture from reacting among themselves to carry out the oxidation reaction and, therefore, the corrosion of metal.

KLANSEM / SEMI SYNTHETIC FLUIDS FOR CUTTING

Semi-synthetic cutting fluids of cutting of Kläntenn® line are products formulated with a wide range of raw materials adjusted to the most demanding cutting processes. They contain enough oil percentage in its formula to provide the required lubricity, preserving the unique feature of semi-synthetic products: the formation of micro-emulsions.

KLANSOL / PREMIUM SOLUBLE FOR CUTTING

Kläntenn® line of premium soluble oils, has a high content of oil, thus enabling the lubrication required to manage any operation. Formulated with additives for heavy service, agents dispersing heat providing necessary cooling in high speed cutting service.

KLANSYN / SYNTHETIC FLUIDS FOR CUTTING

By definition, synthetic cutting fluids are products without mineral oil in their formulation. In order to reach the necessary lubrication in the different processes of metal cutting, they have a comprehensive combination of synthesized compounds to provide the necessary service of reducing friction in the different processes. The fact of not using mineral oil makes these products much cleaner, detersive and better refrigerant, mainly used when continuous cooling is required.